Product Information 
 Unit: set 
 Brand: Novo U.S. special 
 Model: NT-6311 
 Material: Copper Alloy 
 Technical parameters 
 Sensing distance: 20CM 
 Diameter of water: G (1/2) 
 Inlet diameter: G (1/2) 
 Applicable water temperature :1-45 ° C 
 Static power consumption: ≤ 60uA 
 Apply pressure :0.05-0 .7 Mpa 
 Dimensions: 130 * 130 * 75 
 Flushing time: 3 seconds to 8 seconds 
 Power Type: AC and DC 

 Copper alloy sensor faucet - Features 
 Water: sensor taps someone induction flush, no one sensor is not flush, one minute timeout to protect more than 70% of water-saving effect. 
 Hygiene: wash sensor automatically, without human operation, rinse thoroughly, leaving no odor, which can effectively prevent bacterial cross-infection. 
 Saving: DC products use four AA batteries, if used every day 300 times in three years without replacement. 
 The power supply Optional: Division I copper alloy sensor taps can be selected for AC, DC two power supply, some products can be used to pay the DC power supply. 
 Intelligent flushing: according to the frequency of use of the copper alloy sensor taps and time-per-use, intelligent flush control, more effective water conservation. 
 Auto Adjustment: This copper alloy sensor faucet is controlled by microcomputer, the sensing range is adjusted automatically according to the work environment, without human debugging. 
 Installation features: installation method with non-induction products similar to non-professionals to install. 
 Weak: When the voltage is less than 4.6V, the sensor window on the red light blinks, suggesting that the replacement battery. 
 Easy maintenance: equipped with water regulating valve and filter, non-professionals can easily adjust the amount of water and clean the filter. 


 Copper alloy sensor faucet - Notes 
 1: Do not direct water at the sensor to rinse, so as not to damage the machine, impacting battery life, also the risk of electric shock. 
 2: non-professional maintenance staff do not disassemble the repair and modification of copper alloy sensor faucet, so as not to affect product performance due to an error repair; 
 3: Do not use corrosive chemical solvent to clean the appliance shell so as to avoid the appearance of surface damage, deformation; 
 4: Do the sensors installed in the high temperature or corrosive gases, so as not to shorten the service life of copper alloy sensor faucet. 
 5: Use the DC (battery) power supply products, the sensor window of the Low Voltage Directive, please change the batteries.