Product Information 
 Unit: set 
 Brand: Novo U.S. special 
 Model: NT-6023 
 Material: Copper chrome-plated 
 Technical parameters 
 Sensing distance: 75CM 
 Diameter of water: G (1/2) 
 Inlet diameter: G (1/2) 
 Applicable water temperature :1-45 ° C 
 Static power consumption: ≤ 90uA 
 Apply pressure :0.05-0 .7 Mpa 
 Dimensions: 45 * 80 
 Flushing time: 3 seconds to 8 seconds 
 Power Type: AC and DC 

 One full copper chrome-plated induction water conservation - Features 
 Water: full copper chrome-plated water-saving use of integrated sensing pediment three seconds after use, washed eight seconds, more than 70% of water-saving effect. 

 Hygiene: wash sensor automatically, without human operation, rinse thoroughly, leaving no odor, which can effectively prevent bacterial cross-infection. 

 Saving: DC products use four AA batteries, if used every day 300 times in three years without replacement. 

 Optional power supply: one Division I copper chrome-plated induction-saving devices can choose to pay, DC two power supply, some products can be used to pay the DC power supply. 

 Intelligent flushing: induction sanitary ware using frequency and time-per-use, intelligent flush control, more effective water conservation. 

 Automatic adjustment: one full copper chrome-plated induction-saving devices is controlled by microcomputer, the sensing range is adjusted automatically according to the work environment, without human debugging. 

 Installation features: installation method with non-induction products similar to non-professionals to install. 

 Weak: When the voltage is less than 4.6V, the sensor window on the red light blinks, suggesting that the replacement battery. 

 Easy maintenance: equipped with water regulating valve and filter, non-professionals can easily adjust the amount of water and clean the filter. 


 One full copper chrome-plated induction saving water - Notes 
 1: Do not direct water at the sensor to rinse, so as not to damage the machine, impacting battery life, also the risk of electric shock. 

 2: non-professional maintenance staff do not disassemble repair and modification of the product, so as not to affect product performance due to an error repair; 

 3: Do not use corrosive chemical solvent to clean the appliance shell so as to avoid the appearance of surface damage, deformation; 

 4: Do the sensors installed in the high temperature or corrosive gases, so as not to shorten the life of one full copper chrome-plated induction-saving devices. 

 5: Use the DC (battery) power supply products, the sensor window of the Low Voltage Directive, please change the batteries.